A SERVICE OF

logo

Front Flat: Assemble the jack (A) together
with the jack handle (B) and ratchet (C)
as shown. Be sure that the ratchet has the
UP mark facing you.
Rear Flat: Assemble the jack (A) together with
the jack handle (B), jack handle extension (C)
and ratchet (D) as shown.
Be sure that the ratchet has the UP mark facing
you. To assemble the jack handle and jack
handle extension, use the art and text following.
Connect the jack handle (B) and jack handle
extension (C) together and press the retention
clip (arrow) so it engages.
Front Position
Rear Position
367