K4G120 Installation Instructions
10
Adjustments
Pivot Adjustment
1. Extend or collapse column arm (X) as desired. (See Figure
14)
2. (Optional) Loosen or tighten column arm pivot tension
screws as desired to increase or decrease pivot tension.
(See Figure 14)
Figure 14
Height Adjustment (On Column)
1. Loosen 1/4-20 x 1/2” socket head carriage screws (B1)
holding column arm (X) to column (V). (See Figure 15)
2. Adjust column arm to desired height. (See Figure 15)
3. Tighten 1/4-20 x 1/2” socket head carriage screws (B1) to
lock column arm’s position. (See Figure 15)
Figure 15
Height Adjustment (Faceplates)
NOTE: Remove display from faceplate in order to expose
height adjustment screws.
1. Loosen height adjustment screws for specific display that
will be adjusted. (See Figure 16)
2. Adjust display to desired height. (See Figure 16)
3. Tighten height adjustment screws to lock display’s position.
(See Figure 16)
Figure 16
arm extended
arm collapsed
pivot tension
screws
2
1
3
2
2
1
3
1
3
