A SERVICE OF

logo

Installation Instructions PACHFK2
7
7. Orient PAC-502 enclosure following the installation
instructions provided with the PAC-502 and slide enclosure
into opening between upper and lower brackets (A).
(See Figure 7)
Figure 7
8. Secure PAC-502 enclosure to brackets using eight 1/4" flat
washers (E) and eight 5/16-18 x 5/8" button head cap
screws (F) using the 3/16" hex wrench (G). (See Figure 8)
CAUTION: PAC-502 enclosure must be secured on both
sides to side studs using lag screws and bushings following
the installation instructions provided with the PAC502
accessory.
Figure 8
7
(F) x 8
(E) x 8
8