A SERVICE OF

logo

Open as PDF
next previous
show monitor permit-list
CF-766
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show monitor permit-list
To display the permit-list state and interfaces configured, use the show monitor permit-list command
in user EXEC or privileged EXEC mode.
show monitor permit-list
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Examples This example shows how to display the permit-list state and interfaces configured:
Router# show monitor permit-list
SPAN Permit-list :Admin Enabled
Permit-list ports :Gi5/1-4,Gi6/1
Router(config)#
Related Commands
Release Modification
12.2(18)SXE Support for this command was introduced on the Supervisor Engine 720.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Command Description
monitor permit-list Configures a destination port permit list or adds to an existing destination
port permit list.