Configuring Presence Service
How to Configure Presence Service
890
Cisco Unified Communications Manager Express System Administrator Guide
OL-10663-02
SUMMARY STEPS
1. enable
2. configure terminal
3. ephone-dn dn-tag
or
voice register dn dn-tag
4. number number
5. allow watch
6. end
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ephone-dn dn-tag [dual-line]
or
voice register dn dn-tag
Example:
Router(config)# ephone-dn 1
or
Router(config)# voice register dn 1
Enters the configuration mode to define a directory number
for an IP phone, intercom line, voice port, or a
message-waiting indicator (MWI).
• dn-tag—Identifies a particular directory number during
configuration tasks. Range is 1 to the maximum number
of directory numbers allowed on the router platform, or
the maximum defined by the max-dn command. Type
? to display range.
Step 4
number number
Example:
Router(config-ephone-dn)# number 3001
or
Router(config-register-dn)# number 3001
Associates a phone number with a directory number to be
assigned to an IP phone in Cisco Unified CME.
• number—String of up to 16 characters that represents
an E.164 telephone number.
