213
xe pool-retrieve-wlb-report report=optimization_performance_history \
poolid=<51e411f1-62f4-e462-f1ed-97c626703cae> \
utcoffset=<-5> \
start=<-3> \
end=<0> \
filename=</optimization_performance_history.txt>
xe pool-retrieve-wlb-report report=pool_health_history \
poolid=<51e411f1-62f4-e462-f1ed-97c626703cae> \
utcoffset=<-5> \
start=<-3> \
end=<0> \
<filename=/pool_health_history.txt>
xe pool-retrieve-wlb-report report=vm_movement_history \
poolid=<51e411f1-62f4-e462-f1ed-97c626703cae> \
utcoffset=<-5> \
start=<-5> \
end=<0> \
filename=</vm_movement_history.txt>
xe pool-retrieve-wlb-report report=vm_performance_history \
hostid=<e26685cd-1789-4f90-8e47-a4fd0509b4a4> \
utcoffset=<-5> \
start=<-3> \
end=<0> \
<filename=/vm_performance_history.txt>
pool-send-wlb-configuration
Modifies Workload Balancing configuration settings, including thresholds, WLB power-management
settings, and weightings. It is not mandatory to configure all settings with the command. You can configure
only some parameters, but not all, if desired.
Before using the pool-send-wlb-configuration command, learn about the default values on your system by
running pool-retrieve-wlb-configuration.
When you run the pool-retrieve-wlb-configuration command, additional parameters appear that are not
documented in this section. Citrix does not recommend editing these parameters.
pool-send-wlb-configuration
[ config:HostMemoryThresholdCritical=<HostCpuThresholdCritical=value>
config:HostMemoryThresholdHigh=<HostMemoryThresholdHigh=value>config:HostPifReadThresholdCritical=<HostPifReadThresholdCritical=value>
config:HostPifReadThresholdHigh=<HostPifReadThresholdHigh=value>
config:set_host_configuration=<true | false> ...]
Use the pool-send-wlb-configuration command with the arguments <ParticipatesInPowerManagement>
and <set_host_configuration> to configure Workload Balancing's Host Power Management feature.
xe pool-send-wlb-configuration \
config:<host_21_> \
ParticipatesInPowerManagement=<true> \
config:set_host_configuration=<true>
