Clickfree Wireless Backup (Windows) Backing Up
Copyright © 2010 Storage Appliance Corporation. 7
Backing Up
If you have not yet backed up a computer onto the Clickfree Wireless, follow the
instructions below.
If you have previously backed up a computer onto the Clickfree Wireless, use the
BackupLink utility – see page 10.
BACKING UP A COMPUTER THE FIRST TIME
1. Make sure that your computer is switched on and has finished starting up.
2. Connect the USB cable on the Clickfree Wireless to a USB port on your computer. DO
NOT connect the Clickfree Wireless power cable to a power outlet.
3. When Clickfree starts to run, a
Welcome window appears and shows the number of
seconds left before the backup starts automatically. You can pause this countdown or
click
Start to begin immediately:
Unless you stop the countdown by clicking a button, at the end of the countdown period
Clickfree starts the backup.
• If you want to let Clickfree decide what needs to be backed up from where, you don’t
need to do anything further. For details, see “What gets backed up?” on page 5.
• If you want to make changes to how backup is done, click
Do More and then
Options and see “Error! Reference source not found.” on page Error! Bookmark
not defined..
