Reset the image to the original factory setting.
Push to exit the OSD main menu.
Push to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).
This function is used to adjust the OSD background from opaque to transparent.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.
Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except
button.
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre
selectedonentry.Pressandhold button for 15 seconds to unlock and allow user access to all applicable settings.
To turn on or off audio power during power save mode.
Default is "Enable". Select Disable to disable this feature.
Yes — Turn off audio power during power save mode.
No — Turn on audio power during power save mode.
Audio offers two kind of configurations of audio channels. Use the or button to move between 2 channels and 5.1 channels
andandselectthedesiredoption.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC. You can disable this feature by selecting "Disable".
Default is "Enable". Select Disable to disable this feature.
Enable this feature for best user experience and optimum performance of your monitor.
Below warning message appears when you select “Enable DDC/CI”:
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD
Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature
does not remove burn-in.
Below warning message appears when you select “Enable LCD Conditioning”:
NOTE: Use LCD Conditioning only when you experience a problem with image retention.
ResetallOSDsettingstothefactorypresetvalues.
