Dell E178FP Manual

Open as PDF

next previous

Automatic Save

With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments

you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.

OSD Warning Messages

A warning message may appear on the screen indicating that the monitor is out of sync.

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to

use.SeeSpecificationsfortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis1280X1024@60Hz.

Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.

DDC/CI(DisplayDataChannel/CommandInterface)allowsyoutoadjustthemonitorparameters(brightness,color,balance,

etc.)viasoftwareapplicationsonyourPC.

Select Disable to disable this feature.

Forbestuserexperienceandoptimumperformanceofyourmonitor,keepthisfeatureenabled.

NOTE: Press any button on the monitor to terminate LCD Conditioning at any time.

NOTE:If user select 'disable' for DDC/CI,the warning message will appear on screen.Then user can select Yes or No according to

need.

Cannot Display This Video Mode

Optimum resolution 1280 x1024 60Hz

NOTE: The floating 'Dell - self-test Feature Check' dialog appears on the screen if the monitor cannot sense a video signal.