Dell SE198WFP Manual

next previous

The following table describes the front panel buttons:

Using the OSD Menu

1. Press the Menu button to open the OSD menu and display the main menu.

Input select

Use the Input Select button to choose between two different video signals that may be connected to your monitor.



NOTE: The floating 'Dell Self-testFeatureCheck'dialogappearsonablackbackgroundifthemonitorcannot

sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll

continually.

or

OSD menu / select

The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See

Using the OSD Menu.

Down (-) and Up (+)

Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.

Power Button and Indicator

Usethepowerbuttontoturnthemonitoronandoff.

TheBluelightindicatesthemonitorisonandfullyfunctional.Anamberlightindicatespowersavemode.



NOTE: Ifyouchangethesettingsandtheneitherproceedtoanothermenu,orexittheOSDmenu,themonitorautomaticallysavesthose

changes.ThechangesarealsosavedifyouchangethesettingsandthenwaitfortheOSDmenutodisappear.

Main Menu for Analog (VGA) Input



Main Menu for Digital (DVI) Input