Dell SP1908FP Manual

next previous

Factory

Reset:

ResettheOSDmenuoptionstothefactorypresetvalues.

Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.

Positionsettingsonly— Change the settings for Image Position back to original factory settings.

Color settings only — ChangetheRed,Green,andBluesettingsbacktotheiroriginalfactorysettingsandsetthedefault

settingforNormalPreset.

All settings —Changealltheuser-adjustablesettingsincludingcolor,position,brightness,contrastandOSDholdtimetothe

factory defaults. The language of the OSD does not change.

IR —This feature will help reduce minor cases of image retention.



Enable LCD Conditioning: If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image

retention. Using the LCD Conditioning feature may take several hours. Severe cases of image retention are known as burn-in,

the LCD Conditioning feature does not remove burn-in.

Below warning message appears when you select “Enable LCD Conditioning”:

DDC/CI —Enable the DDC/CI control function.

DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor parameters (brightness, color balance, etc)

via software applications on your PC.

Default is "Enable". Select Disable to disable this feature.

For best user experience and optimum performance of your monitor, keep this feature enabled.



NOTE: Use LCD Conditioning only when you experience a problem with image retention.



NOTE: Press any button on the monitor to terminate LCD Conditioning at any time.



NOTE: If you select Disable, a warning message as shown below appears. Select Yes to return to

Factory Reset menu. Warning message time out in 20 sec.