10
To serialize your labels
1. Enter the text for your label.
2. Use the arrow keys to move the cursor under the
letter or number to serialize.
3. Press .
4. Enter the number of labels you wish to print and
press or to begin printing. Enter 1-99 for
numbers and 1-26 for letters.
To print multiple copies of the same serialized
label, choose + and enter the number of
copies of each label to print. See Printing Multiple
Copies on page 9.
Adjusting Print Quality (Advanced)
Depending on the label material you choose, you
may need to lighten or darken the print on the label.
Adjusting the print head temperature allows you to
control the print quality (+/- 20).
To set the print head temperature
1. Press + .
2. Use the arrow keys to select the print head
temperature and press .
3. Repeat as necessary until you are satisfied with
the print quality.
Cleaning Your Printer
Your printer is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your printer from time to time to keep it
working properly. Clean the cutter blade each time
you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to expose
the cutter blade.
3. Use a cotton ball and alcohol to clean both sides
of the blade.
4. Release the cutter lever.
To clean the print head
➤ Clean the print head using the cleaning tool
located inside the tape compartment lid.
RhinoPRO Label Cassettes
The following industrial label cassettes are
available for the RhinoPRO 5000 printer.
SERIAL
Print
Print
SAVE
Material Type
3/8”
(9 mm)
1/2”
(12 mm)
3/4”
(19 mm)
Length
Flexible Nylon
White
—
18488 18489
11.5’
(3.5 m)
Flexible Nylon
Yellow
—
18490 18491
11.5’
(3.5 m)
Permanent Polyester
White
18482 18483 18484
18.0’
(5.5 m)
Permanent Polyester
Metallic
18485 18486 18487
18.0’
(5.5 m)
