DMX PARTNER
5
Section 4: Front Panel Overview
1. 1-4 Chase Buttons- used to store and playback
chases. Up to 99 steps can be stored into each chase
button. Chases can be played back in one of two
modes- sequential or mixed. A chase will incorporate
the same hold and fade time for each step.
2. 1-2 Show Buttons- used to store and playback
shows. Up to 99 steps can be stored into each show
button. Shows can be played back in one of two modes-
sequential or mixed. However, unlike chases, shows
can incorporate different hold and fade times for each
step.
3. 5-8 Chase Buttons- used to store and playback
chases. Up to 99 steps can be stored into each chase
button. Chases can be played back in one of two
modes- sequential or mixed. A chase will incorporate
the same hold and fade time for each step.
4. Joystick- used to control Pan & Tilt movement of a
moving light on the fly.
5. Send Button- used to send memory data file to
another DMX Partner or PC. (See Section 16 for
additional data transfer information).
6. Fade Button- used to adjust chase or show fade times. When selected, a chase or show fade time
can be changed with the UP/Down buttons.
7. Receive Button- used to receive a memory data file from another DMX Partner or PC. (See Section
16 for additional data transfer information).
8. Speed Button- to adjust chase or show hold times. When selected, a chase or show hold time can
be changed with the UP/Down buttons.
9. Display- display’s chase/show times and current operation mode.
10. Record Button- used to record chase and show steps. Also used to engage record mode.
11. Mode Button- used to select between DMX, Audio or Manual operation modes.
12. Delete Button- used to delete chase and show steps when in record or record edit modes.
13. Blackout Button- used to blackout all selected chases and shows.
14. Pan/Tilt Button- used when assigning joystick to fixtures and to select assigned fixture or fixtures for
joystick control.
15. Strobe Button- quick access strobe effect during chase or show playback. Any selected chase or
show will incorporate a strobe effect when this button is selected.
16. Up/Down Buttons- these button are used to increase or decrease chase and show step and fade
times. Also used when in record edit mode to increase or decrease selected chase or show step.
