Electrolux 241868904 Manual

A SERVICE OF

next previous

9

Installing Door Handles

Door Handle Mounting Instructions

1 Remove handles from carton and any other protective

packaging.

2 Position freezer handle end caps over upper and

lowerpre-installedshoulderbolts(A)thatare

fastened into door, ensuring the holes for the set

screws are facing towards the refrigerator door.

3 While holding handle ﬁrmly against door, fasten upper

andlowerAllensetscrews(B)withsupplied 

Allenwrench.

4 Repeat steps 2 and 3 to install refrigerator handle.

Ensure the holes for the set screws are facing towards the freezer door.

A

B

Freezer Lower End Cap

A

B

Refrigerator Lower End Cap

A

B

Freezer Upper End Cap

A

B

Refrigerator Upper End Cap

NOTE

Allsetscrewsshouldbetightenedandsub-ush(Allensetscrewshouldbeseatedjustbelow

the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and

refrigerator doors with no gaps.