12
Plug socket
The plug socket necessary for con-
nection of your appliance to the
electricity supply should be positio-
ned so that it is possible to pull out
the appliance plug.
If your appliance is installed under
a continuous worktop, the plug
socket should be provided as
shown.
A concealed protective contact
plug socket requires 10 A/16 A
fusing.
If the socket is not accessible once the appliance is built in, the
electrical installation must include suitable means of isolating the
appliance from the mains (e.g. fuse, cut-out, current trip or similar with
a minimum contact separation of 3 mm).
Starting up and temperature regulation
0Insert the plug of the connection lead into the plug socket with
protective earth contact. When the refrigerator compartment door is
opened, the internal lighting is switched on.
The temperature selector knob is
located on the RH side of the
refrigerator compartment.
Setting „0“ means: Off.
Turning clockwise in direction „1“:
Refrigerating unit on, the latter
then operating automatically.
Setting „1“ means:
Hightest temperature, warmest
setting.
Setting „6“ (end-stop) means:
Lowest temperature, coldest
setting.
The temperatures in the refrigerator compartment and freezer
compartment cannot be independently regulated.
At a low ambient temperature of around 16°C, setting „1“ should be
selected. At ambient temperatures of around 25°C, select setting „2“.
