Aquapower 2000
2.3
Appliance cleaning!
B
Danger!
Always unplug power cable before cleaning.
A
Caution! Do not use aggressive detergents containing solvents.
· Clean filter element cover regularly.
· Clean filter element, rotor and fountain head if flow is disturbed.
Cleaning the filter elements
· Loosen cover 1 by pressing on the
spring clips 2 and pull off.
· Pull off flow regulator 3.
· Pull out filter element 7 and rinse
with water.
3
When replacing the flow regulator
make sure it locks in place (turn if
necessary).
Cleaning the rotor
· Turn pump upside down.
· Turn base 4 at its feet 5 (“open”)
until loosened and pull out from
pump casing.
· Remove rotor 6 and rinse with
water.
Cleaning the fountain head
· Rinse fountain head with water;
remove obstinate soiling with a soft
brush.
2
3
6
7
4
5
1
P0005 Seite 3 Freitag, 20. Februar 1998 11:55 Uhr
