User’s Guide 23
System Menu
MIDI CC - Allows you to assign MIDI Continuous Controller numbers
to the data slider so it can be used as a performance control. After selecting
a CC channel, the slider will send data to the internal synthesizer as well as
sending MIDI CC data messages to an external MIDI synth or computer
application.
You can control these internal synthesizer parameters using the data slider.
Parameter MIDI Controller No.
Pan 10
Release (only) 72
Decay (only) 75
Global Aftertouch On/Off 85
Local Control On/Off 122
To Control Pan using the Data Slider: ►
Press the 1. Select button until CC Assign is selected.
Use the 2. Data Slider to select the MIDI controller number: 10 (Pan).
Press the 3. Select button repeatedly until none of the select LEDs are
lit.
Move the 4. Data Slider to adjust the Pan position.
MIDI Chn
Allows you to set the MIDI channel for the keyboard. Keyboard and
controller data will be transmitted on this channel.
If Split Mode is selected, the MIDI channel will be set for the currently
selected section (upper or lower). The upper and lower sections can each
transmit on a dierent MIDI channel. (In either Split or Layer mode.)
To Select a MIDI Channel: ►
Press the 1. Select button repeatedly until the MIDI Chn LED is lit.
Select the desired MIDI Channel 2. using the data slider.
Press 3. Select to exit the menu.
