61
Remote Setup
CAMERA
To configure Camera options:
1. Select a camera icon at the top of the window.
2. For the selected camera configure the
fol
lowing:
• COVERT: Sel
ect YES/NO. If YES, the camera
channel will be obscured from live viewing to
give the impression that no camera is
recording. Use this option if the display
monitor is in public view.
NOTE: The
Covert channel will use the same
ba
ckground color as a disconnected
camera. To change the background color,
see see “DISPLAY” on page 60.
• BR
IGHTNESS, CO
NTRAST, COLOR: Adjust
from 0~100.
• TITLE: enter a name/title for the camera
• PTZ MODEL: Sele
ct the model of your
connected PTZ camera from the drop-down
menu
• PTZ I
D:
Enter your PTZ ID (PTZ ID should
match the camera channel to which you have
connected the PTZ camera)
3. Repeat steps 1~2 for any remaining cameras.
4. Click
APPLY and then OK to save your
settings and close the window.
MOTION
To configure Motion options:
1. Under RECORD TIME, adjust the time from
10~300 seconds.
NOTE: The set re
cording time is applicable
to all channels.
2. Under CAMERA SELECT, select a ca
m
era icon.
3. Under SENSITIVITY, and adju
st from 1~20. The
higher the number, the greater the sensitivity.
4. Under MOTION GRID,
click one o
f the grid
icons to apply a
motion grid to the
selected camera.
NOTE: Disabl
ed
bl
ocks are colored
grey
. Active blocks will
be
turquoise-colored
when motion is
detected.
5. Repeat steps 1~4 for any re
maining cameras.
6. Click APPLY and
then OK to save your settings
and close the window.
Figure 33.0 Camera options
Figure 34.0 Motion options
