A SERVICE OF

logo

Open as PDF
next previous
10
μ
A, mA, and A Current functions
Default at DC. Press SELECT button momentarily to select AC.
*Note: When measuring a 3-phase system, special attention should be taken to the
phase-to-phase voltage which is significantly higher than the phase-to-earth voltage.
To avoid exceeding the voltage rating of the protection fuse(s) accidentally, always
consider the phase-to-phase voltage as the working voltage for the protection fuse(s).
PC-COMM computer interface capabilities
The instruments are equipped with an optical isolated interface port at the meter back
for data communication. An optional PC interface kit is required to connect the meter to
the PC computer.
A
A