18
TEMPERATURE (MP530 ONLY)
RANGE
ccurac
-50°C TO 1000°C
0.3% + 3d
-58°F TO 1832°F
0.3% + 6d
FREQUENCY
Function Sensitivity
(ACrms)
Range
mV 300mV 10Hz - 125kHz
5V 2V 10Hz -
125kHz
50V 20V 10Hz -
20kHz
500V 80V 10Hz -
1kHz
1000V 300V 10Hz - 1kHz
Ω, Cx, diode
300mV 10Hz - 125kHz
μA, mA, A
10% F.S. 10Hz - 125kHz
Peak mode for V & A functions
Accuracy: Specified accuracy
±
150 digits for changes > 0.8 ms in
duration
Audible Continuity:
Measurement threshold: Beeper will sound if measurement is below 20.
Beeper will not sound if measurement is above 200. Beeper may or
may not sound if measurement is between 20 and 200. Response
time: < 100
μ
s
Diode Test: Typical test current; 0.4mA, open circuit voltage; <3.5VDC
Accuracy Notes: Accuracy is ± (% reading digits + number of digits), or as
otherwise specified, at 23°C ±5°C < 75% R.H. True RMS accuracies are
specified from 5% to 100% of range or as otherwise specified. Maximum
Crest Factor <3:1 at full scale & <6:1 at half scale (with frequency
component within the specified frequency bandwidth for non-sinusoidal
waveforms).
Digital Display: 5000-count LCD display; 5 per second nominal
refresh rate
Bar Graph Display: 52-segment bargraph; 60 per second nominal
refresh rate
Low Battery: Below approx. 7V
Operating Temperature: 32° to 113°F (0° to 45°C)
