Operation and Setup, cont’d
ISM 824 Integration Scaling Multiswitcher • Operation and Setup
3-24
Figure 3-34 — Steps 1 and 2 for adjusting brightness and contrast
3. Using the left front panel encoder (
[),
adjust the brightness (0 to 255,
default is 128), and with the right (
{
) encoder, adjust the contrast (0 to 255,
default is 128).
N
Brightness and contrast adjustments are not available for scan converter cards.
4. Press the Esc button to clear all button and reset the LCD.
Adjusting the picture detail
To adjust the picture detail do the following:
1. Press the Esc button to clear all pending changes and reset the LCD.
2. Press and release the detail adjustment button. The output buttons for scaler
/scan converter cards (outputs 3 through 8) and any associated (tied) input
buttons light solid green. Untied outputs ash green. The LCD panel shows
the current detail setting (see figure 3-35) for that lit output.
N
All applicable outputs light or flash green. To change to a different output, press
the desired output button. The selected button will light green
PICTURE ADJUSTMENTS
POSITION
SIZE
ZOOM
COLOR/
TINT
BRIGHT/
CONT
DETAIL
128
Out #5 Detail
Step 2.
Press the Detail button. The button lights
green.
Step 1.
Press the Esc button to
clear all selections.
The Esc button flashes
green once.
C O N T R O L
PRESET
ENTER
ESCVIEW
The scaler output card button (#5) and associated input
(#2) light green. Non tied inputs (#8) flash green.
N The LCD shows the current detail setting.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
OUTPUTS
INPUTS
Figure 3-35 — Steps 1 and 2 for adjusting detail
3. Using either of the front panel encoders (
[ or
{
), adjust the detail.
N
For Universal Scaler cards, detail range is 0 to 255, default is 128, and for Video
Scaler cards, detail range is 0 to 63, default is 16.
4. Press the Esc button to clear all button and reset the LCD.
PICTURE ADJUSTMENTS
POSITION
DETAIL
SIZE
ZOOM
COLOR/
TINT
BRIGHT/
CONT
128 128
Brt Out #5 Cont
1
2
4
3
6 7 8
OUTPUTS
INPUTS
Step 2.
Press the Bright/Cont button.
The button lights green.
Step 1.
Press the Esc button to
clear all selections.
The Esc button flashes
green once.
C O N T R O L
PRESET
ENTER
ESCVIEW
The scaler output card button (#5) and associated input
(#2) light green. Non tied scaler outputs (#8) flash green.
1
5
8
7
6
5
4
3
2
N The LCD shows the current Bright/Cont setting.
