Fluke 433/434
Getting Started
6
Brightness:
Press to dim or brighten the backlight.
Dimmed brightness saves battery
power. For extra brightness keep
pressed for 5 seconds.
Contrast adjustment of the display is explained in the next
section as a part of ‘Menu Navigation’.
Lock keyboard for unattended measurements:
ENTER
Press for 5 seconds to lock ( ) or
unlock the keyboard.
Reset of the Analyzer to factory default settings is
explained in section ‘Setting up the Analyzer’.
Menu Navigation
Selection of measuring functions and adjustment of
settings is done via screen menus. How to use these
menus is illustrated below.
As an example setting the Date of the Real Time Clock
and Contrast adjustment are explained:
Date adjustment:
SETUP
The SETUP menu pops up.
Use the up/down arrow keys to
highlight ‘Date’. The current date
shown.
ENTER
Press to access the DATE ADJUST
submenu.
Highlight ‘Day’.
Adjust the Date.
Use the arrow keys to highlight the
preferred date representation:
Day/Month/Year or Month/Day/Year.
F5
Press function key F5 three times to
confirm the selections and to return to
the SETUP menu.
Contrast adjustment:
F4
Press function key F4 to access the
submenu where CONTRAST can be
adjusted.
Adjust CONTRAST to your preference.
F5
Press repeatedly to move upwards
through the menus.
