Fusionbrands, Inc. MS-AV700i Manual

A SERVICE OF

next previous

13

SETTING AND CLEARING THE ALARM

Use alarm mode to turn on the 700 Series at a pre-deﬁned time.

When the alarm is activated, your 700 Series will play the last selected input

source at the volume level in use when the unit was turned off.

Menu key Encoder

To set the alarm:

1. Press the Menu key.

2. TurnandthenpresstheRotaryEncodertoselectSettings > Clock > Set alarm.

3. Do one or both of the following:

• TurntheRotaryEncodertochangethehoursetting.

• PresstheRotaryEncodertomovetotheminuteseld.Adjusttheminutes

settingasrequired.

• PresstheRotaryEncodertomovetotheAM/PMeld(ifenabled).Turn

encoder to select AM or PM.

4. Press the Menu key to save the time settings and exit (the time out feature does

notoperatehere).

5. HighlighttheAlarm enabledcheckboxandpresstheEncodertoenableit().

6. Press any key to exit

To clear the alarm:

1. Press the Menu key.

2. TurnandthenpresstheRotaryEncodertoselectSettings>Clock.

3. HighlighttheAlarmenabledcheckboxandpresstheRotaryEncodertodisable

it().

4. Press any key to exit