
48 GPSMAP
®
4000/5000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Selecting the Engine Gauge Type
You can set the type of gauges that appear on the rst engine gauge page. If you have one or two engines, you
can view either analog or digital gauges. If you have three or more engines, you can view only digital gauges.
From the Home screen, select > > > > .
Digital Gauges
Analog Gauges
Selecting the Number of Engines Shown in Gauges
The digital engine gauges can show information for up to four engines. The analog engine gauges can show
information for up to two engines.
1. From the Home screen, select > > > > >
.
2. Select the number of engines.
3. Complete an action:
• Select .
• Complete steps 2 and 3 of “Selecting the Engines Shown in Gauges” (page 48) to select the engines for
which information appears in the gauges.
Selecting the Engines Shown in Gauges
You must manually select the number of engines shown in the engine gauges (page 48) before you can select
the engines for which information appears in the gauges.
1. From the Home screen, select > > > > .
2. Select .
3. Select the engine for which you want to view information in the rst gauge or bar.
For example, if you select “Engine 2,” the rst engine gauge or bar shows information for the engine
identied as “Engine 2” on the NMEA 2000 network.
4. Repeat steps 2 and 3 for the second, third, and fourth engine gauge or bar, as needed.
5. Select .