A SERVICE OF

logo

Open as PDF
next previous
20
0ULLOUTONHANDLEONFRONTOFCHILDRESTRAINT(a) and adjust to forward-facing
position 2 or 3 (b) BASEDONYOURCHILDSSIZE
-AKESURErear-facing LATCH belt
is stored. (see fig. b, pg. 38)
5NHOOKTETHERFROMTETHERSTORAGESEE
PAGE
3. Place
forward-facing ONVEHICLESEAT
equipped with LATCH anchors.
&OREASEOFINSTALLATIONEXTENDLATCH
BELTTOITSMAXIMUMLENGTH
4. Attach forward-facing connectors to
VEHICLELOWERANCHORS(c). Belt must lie
flat and not be twisted. Pull connectors
to be sure they are securely attached (d).
3LIDECHILDRESTRAINTBACKUNTILTHE
RESTRAINTISINCONTACTWITHTHEVEHICLE
SEATBACK
0RESSDOWNFIRMLYINCENTEROFCHILDRESTRAINTTOCOMPRESSVEHICLESEATCUSHION
while tightening LATCH belt by pulling the adjustment belt (e).
FORWARD-FACING INSTALLATION WITH LATCH
a
d
c
b
CLICK!
e