Model G7943/G7944 (Mfg. 10/02+)
-13-
The Model G7943/G7944 was carefully packed
when it left our warehouse. If you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
Set Up Safety
SECTION 3: SET UP
The Model G7943/G7944
is a heavy machine. DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Wrench 16mm ............................................ 1
• Wrench
9
⁄16 .................................................. 1
• Plumb Bob .................................................. 1
• People for Lifting Help ................................ 1
• Rubber Mallet ............................................. 1
• 60W Light Bulb ........................................... 1
• Permanent Marker ...................................... 1
• Lag Bolts
3
⁄8-16 x 3 (or length as needed) . . 4
• Carriage Bolts M10-1.5 x 95 ....................... 4
• Flat Washers 10mm ................................... 4
• Hex Nuts M10-1.5 ...................................... 4
• Ruler ........................................................... 1
• Drill ............................................................. 1
• Drill Bit
11
⁄32" ................................................ 1
• Plywood
3
⁄4" x 23
3
⁄4" x 23
3
⁄4" ........................ 2
• Wood Glue ................................. As Needed
• Wood Screws #6 x 1
1
⁄4" ............................ 24
Items Needed for
Set Up
