CIRCUIT REQUIREMENTS
Figure 1.
<gdjcY^c\Egdc\^h
Adc\Zhid[i]ZI]gZZ
Egdc\h
8jggZci
8Vggn^c\Egdc\h
<gdjcYZY
DjiaZi
Amperage Draw
Minimum Circuit Requirement
If
you are unsure about the wiring codes
in your area or you plan to connect your
machine to a shared circuit, consult a
qualified electrician.
Plug/Receptacle Type
110V Operation
This machine must have a ground
prong in the plug to help ensure
that it is grounded. DO NOT remove
ground prong from plug to fit into a
two-pronged outlet! If the plug will
not fit the outlet, have the proper
outlet installed by a qualified electri-
cian.
Electrocution or fire
could result if machine
is not grounded cor-
rectly or if electrical
configuration does not
comply with local and
state codes. Ensure
compliance by check-
ing with a qualified
electrician!
Extension Cords
