Figures 26–27
Figure 27.
ALWAYS use an auxiliary jig and extreme care
when free-hand routing that requires remov-
al of the fence. Routing without the fence
and the attached guard greatly increases the
risk of accidental contact with the spinning
cutter, causing serious personal injury.
To free-hand route:
1.
2.
Figure 27
Note: Make sure any fasteners used will not
make contact with the router bit during the
cutting operation. Glue can be used as an
alternative.
3.
4.
5.
Figure 27
6.
Figure 28
Rub
Collar
Workpiece
Template
Figure 28.
