Figures 21–22
Figure 22.
ALWAYS use an auxiliary jig and extreme
care when free-hand routing. Routing with-
out the fence and the attached guard greatly
increases the risk of accidental contact with
the spinning router bit, causing serious per-
sonal injury.
To free-hand route:
1.
2.
Figure 22
Note: Make sure any fasteners used will not
make contact with the router bit during the
cutting operation. Hot glue can be used as an
alternative.
3.
4.
5.
Figure 22
6.
Figure 23
Workpiece
Template
Guide
Bearing
Figure 23.
7.
