A SERVICE OF

logo

Cover Pipe
PVC Distribution Pipe
Distribution Pad
45 Flute
15 Flute
Air Flow
Red Dot Indicates
Position in Unit
SERVICE AND PARTS
Evaporative cooler media may be removed from the rear for cleaning or replacement, as required, by 
removing the upper rear panel. Use only standard garden hose variety, with minimal water pressure, to avoid 
damaging the filter media when cleaning. It would be advisable to replace evaporative cooler media every 
five years on units that are subject to contaminated atmospheres, or where water has a high mineral content.
Installation of evaporative media requires the 45 deg. angle flutes to slope down toward the air 
entering the pad. Use care in handling the pad to avoid damage.
MEDIA INSTALLATION DETAIL
- 6 -