A SERVICE OF

logo

KK-F-VAK_INST_10-08
2
Remove the hex head screw on
the vent cover
Remove the vent cover
mpletely. It will not be re-useco d.
l
Remove the hex head lag bolt
ocated above the blower motor of
the OEM rear HVAC unit
Remove the hex head lag bolt
holding the intake cover of the
OEM rear HVAC unit
Remove the hex head screws on
the intake cover
Remove the intake cover.
Intake cover will not be re-used.
Attach the HVAC hose and
clamps to the plenum assembly
View of the components at this
point of the installation
Place the unit as shown above