A SERVICE OF

logo

4–38 Maintenance and Service Guide
Removal and replacement procedures
3. If it is necessary to replace the display bezel or any of the display assembly internal components:
a. Remove the eight rubber screw covers 1 and 2.
The rubber screw covers 1 on the top edge of the display bezel are larger than the rubber screw
covers 2 on the bottom edge of the display bezel.
b. Remove the four Torx T8M2.5×6.0 screws 1 and the four Phillips PM2.5×5.0 screws 2 that secure the
display bezel to the display assembly.