Switch cover
Description Spare part number
For use only with computer models with wireless LAN capability (includes wireless
button and wireless light)
438561-001
For use only with computer models without wireless LAN capability 438560-001
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 28).
Remove the switch cover:
1. Turn the computer upside down with the rear panel toward you.
2. Remove the five Phillips PM2.0×9.0 screws that secure the switch cover to the computer.
3. Partially open the computer.
ENWW Component replacement procedures 37
