A SERVICE OF

logo

Starting Out with Your OmniBook
Setting Up the OmniBook
1-3
Setting Up the OmniBook
This chapter describes the first-time setup of your HP OmniBook hardware,
including the following:
Installing the battery.
Connecting the ac adapter and charging the battery.
Selecting a factory-installed operating system.
To set up the OmniBook
1. Insert the battery.
2. Plug the power cord into the ac adapter, then into a grounded outlet.
CAUTION
Use only an HP F1140A or HP F1044B ac adapter. Using an improper adapter
could damage the OmniBook and will make your warranty invalid.
OmniBook 2000
Use only an HP F1317A
-or-
HP F1193B battery.
OmniBook 5700
Use only an HP F1193B battery.