A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 66
Save the retaining screw.
9. Open the expansion board slot retainer.
10. Remove the HP NC375i adapter ("HP NC375i adapter" on page 63) from expansion slot 10.
11. Remove the HP NC524SFP module from the HP NC375i adapter.
To replace the component, reverse the removal procedure.
Systems Insight Display
To remove the component:
1. Power down the server (on page 27).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Tower bezel" on page 30).
o Extend the server from the rack (on page 28).