HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
AZ870A
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
AZ885A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
AF616A
HP Server Console 0x2x16 Port Analog Switch
AF617A
HP TAA 0x2x16xKVM Server Console G2 Switch
AF626A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF619A
HP KVM CAT5 1-pack USB Interface Adapter
336047-B21
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP 1x4 USB/PS2 KVM Console Switch
HP 1x4 USB/PS2 KVM Console Switch
AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
AF622A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
Rail Kits
NOTE:
The HP 1U Gen8 Cable Management Arm is not available when using Friction
Rails. To assist in the installation of the server into the rack an optional installation tool
is available by contacting your local services representative (p/n 695539-001).
Caution:
HP recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE:
For SFF models.
NOTE:
Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit which does
allow for in rack serviceability. Due to the size and weight of the server two people are
required to insall the server into the rack. The HP 1U Gen8 Cable Management Arm is
optional. To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative.
Caution:
HP
recommends that a minimum of two people is required for all Rack Server installations.
Please refer to your installation instructions for proper tools and number of people to
use for any installation.
663201-B21
QuickSpecs
HP ProLiant DL360e Generation 8 (Gen8)
Additional Options
DA - 14327 North America — Version 33 — December 16, 2013
Page 45
