Spare 8200zl System Support
Module
The Switch 8200zl series requires a System
Support Module (SSM), and spare modules can
be ordered as it is a critical system component.
The spare SSM ships with the required tool
for removal from the 8200zl chassis, and
replacement should be done during a
scheduled maintenance window as the SSM
is not a hot-swappable component.
Rack-mounting kit
The switches normally ship with rack-
mounting “ears” that allow installation into a
two-post, 19-inch datacomm rack.
If installation into a 10K four-post 19-inch
rack or a four-post rack meeting the standard
EIA unit of measurement is desired, a rack-
mounting kit is available providing rails that
give sturdy support for the switch along its
entire length.
For transporting switches in a rack, please see
the Installation Guide that is included with the
Rack Rail Kits for more instructions.
RPS/EPS and Console Cables
The ProCurve 620 Redundant/External Power
Supply and the ProCurve Switch zl Power
Supply Shelf use cables to individually connect
the RPS (620 only) and EPS (PoE) power to the
target ProCurve zl or yl switches. The same
cable is used for either RPS or EPS power. The
ProCurve 620 comes with four of these cables
and the Power Shelf comes with two, which
are the respective maximum number of cables
usable for each of these units. If a spare cable
is desired, use the following product number.
Note: Even though the RPS/EPS cables are
interchangeable between the ProCurve 620
and Switch zl Power Shelf, the 620 does not
support the zl switches, while the Power Shelf
only works with the zl switches.
Power cords
The power cords available for these switches
are sized for the increased current that can be
drawn meeting the needs of PoE. As a result,
these power cords may not be found in a
typical environment and power cords
“borrowed” from other products will not work
in most instances. Having some spare power
cords on hand may be a good idea. They can
be purchased through the HP Parts Web site:
www.hp.com/buy/parts.
11
Australia/
New Zealand
China
Continental
Europe
Denmark
Israel
Japan
South Africa/
India
Switzerland
Taiwan
Thailand
U.K./Hong Kong/
Singapore
U.S./Canada/
Mexico
1
100 V cord: ships standard with the 620 after April 1, 2007
2
200 V cord: shipped standard with the 620 prior to April 1,2007
3
110 V cord: ships standard with the 875 W power supply
4
220 V cord: twist-lock NEMA L6-20P
5
Twist-lock: NEMAL6-20P shipped standard with the 1500 W power supply
6
Non-locking: NEMA 6-20P
ProCurve
Switch
3500yl/6200yl
8120-5335
8120-8385
8120-5336
8120-5340
8121-1009
8120-5342
8120-5341
8120-5339
8121-0967
8121-0671
8120-5334
8121-0973
ProCurve 620
Red/Ext Power
Supply
8121-0871
8121-0924
8120-6352
8120-6897
8121-1010
8121-0942
1
8120-6903
2
8121-0915
8121-0916
8121-0968
8121-0922
8121-0907
8120-6361
ProCurve
Switch 8200zl/5400zl
875 W supply
8120-5335
8120-1034
8120-5336
8120-5340
8121-1009
8120-5342
8120-5341
8120-5339
8121-0941
8121-0671
8120-5334
8121-0973
3
8121-0941
4
1500 W supply
8121-0871
8121-0924
8120-6899
8120-6897
8121-1010
8120-6903
8121-0915
8120-6897
8120-6903
8121-0675
8120-6898
8120-6903
5
8120-6893
6
Switch zl and yl RPS/EPS cable 5070-0102
DB9-DB9 Console cable for 5400zl Series 5184-1894
RJ45-to-DB9 Console cable for 8212zl 5188-6699
Part number
Two-post Rack Mounting Kit for 5406zl
Two-post Rack Mounting Kit for 5412zl
Switch 3500/6200 rack mounting kit
Two-post Rack Mounting Kit for Switch 8212zl
Switch zl Power Supply Shelf rack
mounting kit
Part number
5069-8561
5069-8562
5069-5705
5070-2983
5070-3028
For 8200zl/5400zl—10K Rack Rail Kit Assembly
For 3500/6200—10K Rack Rail Kit Assembly
Part number
5070-0145
5070-0145
Switch 8200zl System Support Module
Part number
J9095A
