Software and configuration utilities 32
iLO virtual CD-ROM
To deploy with a boot CD:
1. Do one of the following:
o Insert the boot CD into the client PC using the iLO 3 Remote Console.
o Use iLO 3 to create an image file of the boot CD.
o Copy the image of the boot CD to a location on the network or the client PC hard drive.
2. Remotely access the server blade through iLO 3. See "HP BladeSystem c-Class advanced
management (on page 28)."
3. Click the Virtual Media tab.
4. Select the Virtual Media applet.
5. Use the Virtual Media applet to select the local CD or image file and connect the Virtual CD to the
server blade.
6. Use the iLO 3 Virtual Power Button feature to reboot the server blade.
7. After the server blade boots, follow the normal network installation procedure for the OS.
Diskette image deployment
To deploy with a diskette image, the user creates a DOS-based network-enabled boot diskette that
executes a script that configures the hardware and installs the OS. The diskette enables the server blade
to access the required deployment scripts and files on the network.
This method implies a deployment infrastructure that may include an administrator workstation, PXE
server, Microsoft® Windows® file share, or a Linux file share. For more information, refer to "Deployment
infrastructure (on page 29)."
Before beginning the deployment process, connect the server blade to the network.
NOTE: For more information about hardware and cabling configurations, see the documents
that ship with the enclosure.
Two methods are available for diskette image deployment:
• iLO virtual floppy (on page 33)
• PXE ("PXE deployment" on page 30)
Creating a boot diskette
The SmartStart Scripting Toolkit provides the tools and information for creating a boot diskette. For details,
refer to the SmartStart Scripting Toolkit User Guide and download the latest version of the software from
the HP website (http://www.hp.com/servers/sstoolkit
).
As an alternative method, configure the hardware manually with RBSU and the iLO 3 remote console.
With this method, the disk is more generic and integrates with an existing network OS installation
process. For more information, refer to "HP BladeSystem c-Class advanced management (on page 28)."
To operate properly, the server blade must have a supported OS. For the latest information on a
supported OS, refer to the HP website (http://www.hp.com/go/supportos
).
