Resolving borderless printing problems
■ Check the print settings
1 Open the printer driver (see
Printing a document).
2 From the Paper/Quality tab (Windows) or the Paper Type/Quality panel (Macintosh), check the
following settings:
■ Verify that the paper size specified in the driver matches the size of the paper loaded in the input
tray.
■ Select the appropriate paper type.
Streaks appear in a light portion of a printout
If streaks appear in a light portion approximately 63.6 mm (2.5 inches) from one of the long edges of
a photograph, try the following:
■ Install a photo print cartridge (see
Installing or replacing the print cartridges).
■ Clean the print cartridges (see
Cleaning the print cartridges).
Image is printed at an angle
■ If paper is twisting as it feeds or margins appear crooked, make sure the paper width guide and
tray extension fit against the edges of the paper.
■ Printing with a single print cartridge
To do borderless printing with a single print cartridge, the tri-color print cartridge must be
installed. See
Printing with a single print cartridge.
Resolving borderless printing problems 111
