204
Chapter 11 Novell LineJet Print Server Configuration (10/100Base-T)
2. Direct your Web browser to URL:
http://
LineJetIPaddress
/networkConf.html
(e.g., http://192.75.11.9/networkConf.html)
3. Look under the “Novell” section and go to the “Service Type” field to
select the appropriate mode.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
2. You should now see a prompt displayed that has the LineJet Print
Server’s IP address followed by a colon then
root
.
ipaddress
:root>
3. At the prompt, enter:
store pserver novell mode [nds | bindery | auto]
4. Reset the unit to make the changes take effect.
reset
Setting The LineJet Print Server Context (NDS)
The LineJet Print Server allows you to store the print server object in any
context within the NDS tree you choose. By default, the LineJet Print Server
will look for the print server object in the same context as the file server object
it connects to is stored in.
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2. Direct your Web browser to URL:
http://
LineJetIPaddress
/networkConf.html
(e.g., http://192.75.11.9/networkConf.html)
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
