A SERVICE OF

logo

The drum hub on the opposite side is welded. The weld can be
broken or drilled out, but there is a good chance that the hub
will either warp if pried off, or will be hard to align if drilled out.
6. Remove the drum. This is a good time to look at the new
drive gear(s). This is a completely new system. New drums and
gears are being developed.
7. Remove the PCR and clean with your standard PCR cleaner. 8. Remove the 2 screws and the Wiper Blade.
9. Clean out the waste toner.
HP P2035 2055 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA Ph +1 424 675 3300 Fx +1 424 675 3400 techsupport@uninetimaging.com www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.