![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/2e/82e93f39-4df6-4349-8c3a-e6a9fc5046e1/82e93f39-4df6-4349-8c3a-e6a9fc5046e1-bg5f.png)
14
0DLQWDLQLQJWKHDLUÀOWHU
3OHDVHFKHFNDQGFOHDQWKHDLUILOWHUSHULRGLFDOO\IRUNHHSLQJQRUPDOYHQWLODWLRQ:KHQ
the indicators or a message prompts you to clean the air-filter, comply with it as soon as
possible.
:KHQLWLVGDPDJHGRUWRRVRLOHGUHSODFHWKHILOWHUXQLW7RSUHSDUHWKHQHZILOWHUXQLWFDOO
your dealer and tell the type number:
UX35381
NOTE
$ILOWHUXQLWRIVSHFLILHGW\SHZLOOFRPHZLWKWKHUHSODFHPHQWODPSIRUWKLVSURMHFWRU
Replacing the filter unit at the same time with the lamp is recommended.
3OHDVHUHVHWWKHILOWHUWLPHRQO\ZKHQ\RXKDYHFOHDQHGWKHDLUILOWHUIRUDVXLWDEOH
indication about the air-filter.
WARNING
Ŷ%HIRUHFDULQJIRUWKHDLUILOWHUWXUQWKHSURMHFWRURIIDQGXQSOXJWKHSRZHUFRUGWKHQ
cool the projector sufficiently.
Ŷ
Use only the filter unit of the specified type. Do not use the projector with the air-filter removed.
Filter unit
Intake vents
1.
Turn the projector off and unplug the power
cord from the power outlet. And cool the
projector down by leaving it for a while as it is.
2.
Use the vacuum cleaner on and around the filter
unit.
3.
Slide the filter unit upward to take it off from
the projector.
4.
Use the vacuum cleaner on the intake vents of
the projector.
5.
Use the vacuum cleaner on the cover side of the
filter unit. Do not vacuum the air-filter directly,
since the cleaner may inhale the air-filter.
:KHQWKHDLUILOWHULVGDPDJHGRUWRRVRLOHG
prepare the new filter unit.
6.
0DNHVXUHWKDWWKHUHLVWKHDLUILOWHULQVLGHWKHQ
slide the filter unit into place.
7.
Plug in and restart the projector. (
Then, reset the filter time (which is the time counter for the air-filter use).
3UHVVWKHŸRUźEXWWRQRQWKHSURMHFWRURUWKH
MENU
button on the remote
control. The “
EASY MENU
” appears.
(2) Point at the “
FILTER TIME
´LQWKHPHQXXVLQJWKHŸRUźEXWWRQWKHQSUHVV
WKHŹEXWWRQ$GLDORJDSSHDUV
3UHVVWKHŸEXWWRQWRVHOHFWWKH³
RESET
” on the dialog. It performs resetting
the filter time.