Item Description
SETUP
MODE
Select the communication connection control
method to use between the PC and projector.
Match to your PC’s settings.
Use the ▲/▼ buttons to select the MODE to be
used.
ADHOC
ó
INFRASTRUCTURE
CH
Select the channel when using a wireless LAN
connection.
(Channels 1 to 11 are available)
*The available channels would be various
depending on a country. In addition, wireless
LAN card might be required due to the standard.
ENCRYPTION
Select the encrypting method.
Use the ▲/▼ buttons to select the encryption
method to be used.
WPA2-PSK(AES)
ô
WPA-PSK(AES)
ó
WPA-PSK(TKIP)
ó
WEP 128bit
ó
WEP 64bit
ó
OFF
SPEED
Use the ▲/▼ buttons to select the transfer rate.
AUTO
ó
54
ó
48
ó
36
ó
24
ó
18
ó
12
ó
11
ó
9
ó
6
ó
5.5
ó
2
ó
1 (Mbps)
• The AUTO mode automatically selects the optimum rate.
• Transfer rates may change due to the Network situation.
Mbps : Megabits per second
NETWORK MODE
Select the Network mode.
Use the ▲/▼ buttons to select the Network mode.
WIRELESS
ó
WIRED
~Note~
• Network mode will be initialized whenever the power is turned on
with Power switch.
•
The Wireless will be enabled when Wireless Network card is installed.
•
The Wired will be enabled when Wireless Network card is not installed.
MIU Menu (continued)
MIU Menu
'0%4;26+10
92#25-#'5
9'2DKV
92#25-6-+2
92#25-#'5
1((
9'2DKV
0'6914-/1&'
9+4'.'55
9+4'&
