55
WARNING ►Before taking care of the air lter, make sure the power
switch is off and the power cable is not plugged in, then allow the projector to
cool sufciently. Taking care of the air lter in a high temperature state of the
projector could cause an electric shock, a burn or malfunction to the projector.
►Use only the air lter of the specied type. Do not use the projector without
the air lter or the lter cover. It could result in a re or malfunction to the
projector.
►Clean the air lter periodically. If the air lter becomes clogged by dust or the
like, internal temperatures rise and could cause a re, a burn or malfunction to
the projector.
NOTE • Please replace the air lter when it is damaged or too soiled, and
also when you replace the lamp.
• When you replace the projection lamp, please replace the air lter. An air lter
of specied type will come together with a replacement lamp for this projector.
• Please reset the lter time only when you have cleaned or replaced the air
lter, for a suitable indication about the air lter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
Maintenance
9.
Turn the projector on and reset the lter time using the FILTER TIME item in
the EASY MENU
(
24)
.
(1) Press the MENU button to display a menu.
(2) Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A
dialog will appear.
(3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the
lter time.
Air lter (continued)
