Secondary Side – HP ProLiant BL45p G2 Server Blade
1.
Secondary Side Access Panel
2.
Processor 2 Memory Banks C and D
3.
Up to two AMD Opteron™ 8000 Series processors (shown with Processor 2 installed, two additional processors on
Primary Side)
4.
Redundant Fan Module
5.
Processor 4 Memory Banks G and H
Other features on Secondary Side include an additional connector for an optional single or multifunction Gigabit NIC
server adapter, and a connector for an optional Dual Port Fibre Channel adapter (QLogic-based or Emulex-based.)
What's New
Support for 36 GB and 72 GB 15K DP Serial Attached SCSI (SAS) SFF Hot Plug Hard Drives
Support for 72 GB and 146 GB10K DP Serial Attached SCSI (SAS) SFF Hot Plug Hard Drives
At A Glance
This document covers the HP ProLiant BL45p G2 server blade only. For more information on HP BladeSystems p-Class
Infrastructure and HP BladeSystem p-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem p-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12330_div/12330_div.html
and
HP BladeSystem p-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12331_div/12331_div.html
The HP ProLiant BL45p Generation 2 server blade delivers maximum quad-processor performance, enterprise
manageability and availability, and superior expansion capabilities to the datacenter.
Processor
:
Up to four AMD Opteron™ 8000 series processors
Supports up to four AMD Opteron processors Model 8220 (2.8 GHz, 95W) featuring 1MB Level 2 cache
memory per core
Processors are connected through 1 GHz HyperTransport™ links
ServerWorks HT-1000 and HT-2100 chipsets
Memory
:
Up to 64 GB of memory, PC2-5300 Registered DDR2 (667 MHz) memory, 16 DIMM slots
Advanced ECC memory support
Supports 2:1 memory interleaving
S
torage Controller
:
QuickSpecs
HP ProLiant BL45p Generation 2 Server Blade
Overview
DA - 12579 Worldwide QuickSpecs — Version 9 — 11.12.2007
Page 2
