7
Step 6
Check that the wireless name you set is correct, and then click
Submit
.
Then check the status of the Internet indicator. When the Internet indicator
turns green, you can access the Internet.
The preceding operations need only be performed on a computer once. The
next time when you power on the computer, you can access the Internet without
any other configurations.
3 Setting Up a Wireless Connection
If a wireless network adapter is installed on your computer, you can connect
your computer to the HG630a over a wireless connection.
The HG630a's wireless network function is enabled by default. To check the
function status, see section 5.2 "Enabling or Disabling the Wireless Network
Function".
There are two methods for setting up a wireless connection between the
HG630a and your computer.
3.1 Setting Up a Wireless Connection With the
WPS Button
The HG630a supports the Wi-Fi Protected Setup (WPS) function in Push
Button Configuration (PBC) mode. If your computer also supports the WPS
function, do the following to connect your computer to the HG630a wirelessly:
Step 1 Press and hold the WPS button on the HG630a's side panel for at
least 1 second.
The method for installing the wireless adapter and its driver varies by
vendor. For details, see the installation guide provided by the vendor
of your wireless adapter.
Windows 7 supports the WPS function. Windows XP supports the
WPS function using the wireless network adapter.
