A SERVICE OF

logo

15
PROGRAMMING
Auto Recovery selection
or to enable “YES” or disable “NO” the
Auto Recovery Mode. The factory setting is “YES.”
To change between Heat or Cool recovery modes.
NOTE: Auto Recovery is one of the ENERGY STAR
®
features of this thermostat. Refer to the Auto Recovery
section on pages 43-44 for more information.
Remote Sensor Channel (does not apply to thermostat model 44660)
to reach the Sensor Channel Set screen.
to select sensor for RF channel setting ( for Indoor 1,
for Indoor 2, or for Outdoor)
option
7
option
sensor
8
1
2