Husqvarna I0807213 Manual

Open as PDF

next previous

1. Read this owners manual and your vehicle and im ple ment

owners manuals before using this hitch.

2. Do not allow children to operate vehicle or sleeve

hitch.

3. Do not allow adults to operate the vehicle or sleeve hitch

without proper instructions.

4. Do not allow anyone to ride on sleeve hitch.

5. Always place sleeve hitch in lowered position when

attaching an implement.

6. Before lowering and operating the implement, be sure

no one is near the area of operation.

7. Lower the sleeve hitch and implement when leav ing

ve hi cle un at tend ed.

8. Vehicle braking and stability may be affected. Drive slow ly

when sleeve hitch and implement are in raised po si tion.

Stay off of steep slopes.

9. Keep all nuts and bolts tight and be sure the equip ment

is in safe operating condition.

A 2 Hex Bolt, 5/8" x 2"

B 2 Hex Bolt, 5/8" x 1-3/4"

C 4 Hex Bolt, 3/8" x 1-1/4"

D 1 Hex Bolt, 5/16" x 1"

E 4 Carriage Bolt, 3/8" x 1"

F 3 Clevis Pin

G 2 Jam Nut, 5/8"

H 2 Nylock Nut, 5/8"

I 1 Nylock Nut 5/16"

A 2 Hex Bolt, 5/8" x 2"

B 2 Hex Bolt, 5/8" x 1-3/4"

C 4 Hex Bolt, 3/8" x 1-1/4"

D 1 Hex Bolt, 5/16" x 1"

E 4 Carriage Bolt, 3/8" x 1"

F 3 Clevis Pin

G 2 Jam Nut, 5/8"

H 2 Nylock Nut, 5/8"

I 1 Nylock Nut 5/16"

A 2 Hex Bolt, 5/8" x 2"

B 2 Hex Bolt, 5/8" x 1-3/4"

C 4 Hex Bolt, 3/8" x 1-1/4"

D 1 Hex Bolt, 5/16" x 1"

E 4 Carriage Bolt, 3/8" x 1"

F 3 Clevis Pin

G 2 Jam Nut, 5/8"

H 2 Nylock Nut, 5/8"

I 1 Nylock Nut 5/16"

KEY QTY. DESCRIPTION

J 4 Nylock Nut, 3/8"

K 4 Hex Nut, 3/8"

L 4 Lock Washer, 3/8"

M 2 Flat Washer, 3/8"

N 1 Spacer

O 1 Spacer Plate

P 3 3/32" Hair Cotter Pin

Q 1 5/32" Hair Cotter Pin

NOTE:

Bolt (C), Lock Washer (L) and Nut (K) will not be

used unless the mounting holes in the tractor do not already

contain bolts and nuts.

A B

SAFETY RULES

HARDWARE PACKAGE

(SHOWN FULL SIZE)