14
3
POWER
or
Open
/Close
OPEN/
CLOSE
2
1
or
CAUTION
Keep your fingers clear of the disc drawer as it is
closing to avoid personal injury.
DP
C
-6.1
Standby/On
On
O
f
f
Power
Next Selection
Repea
t
Display
Dimmer
Open
/Close
Play
Stop
Pause
Disc 1 Disc 2 Disc 3 Disc 4 Disc 5 Disc 6
Disc Skip
CD Play
DP
C
-6.1
Direct Digital Path
Power
2
3
Disc 1–6
Standby/On
Standby/On indicator
Disc Skip
Disc Skip
Playing back Discs
This section shows you the basics on how to playback a disc.
Most steps in this manual need to be performed using
the supplied remote controller. The relative buttons are
usually indicated at the beginning of a section.
Basic Playback
■ Preparations
• To view a video disc, switch on your TV set and select the video input the DPC-6.1 is connected to. See also pages
10, 11 for how to connect the DVD Changer to your TV set.
• If you are also using an amplifier for separate audio playback (see pages 11, 12, 13), switch on the amplifier and
select the input the DPC-6.1 is connected to.
Connecting to a Wall Outlet and Powering On.
1 Plug the power cable into a suitable wall outlet.
2 Press the Power button on the main unit to switch it
to Standby mode.
The Standby/On indicator on the main unit lights.
3 Press the Standby/On button on the main unit, or the
POWER button on the supplied r emote controller to
switch on the DVD Changer.
The display lights up, and the Standby indicator
goes dark.
Press the OPEN/CLOSE button.
The disc drawer opens, and the disc indicator lights up.
(See “DISC INDICATORS ATTENTION” on page 42.)
Place a disc in the front disc tray (DISC 1).
DP
C
-6.1
DISC 2
DISC 1
DISC 6
Be sure to insert the disc with the playback side down.
■ Placing discs in the remaining disc trays.
Repeatedly press the DISC SKIP button on
the main unit to rotate the disc drawer
counter-clockwise, and place a disc in
each desired tray (1–6).
Press the OPEN/CLOSE button again.
The disc drawer closes.
Press one of the DISC 1–6 buttons to select the
desired disc on the tray for playback.
Notes:
• The DPC-6.1 supports two disc sizes.
To avoid damaging your discs or
causing malfunction, be sure to
insert the discs in the correct guide.
• Only use DVD videos, VIDEO CDs or
audio CDs. Other data carriers may
damage your DVD Changer and/
or amplifier/TV set.
Note:
The disc drawer can also be opened
when the DVD Changer is switched
off.
Note:
Alternatively, press one of the DISC 1–6
buttons to close the disc drawer and
play the selected disc automatically.
4
Open
/Close
-2
-3
Note:
When you use the DPC-6.1 for the first
time:
When the DPC-6.1 is shipped from the
factory, the Power switch is set to On
(
On Off
). Therefore, when you
plug in the power cable to the AC
outlet, the Standby/On indicator lights
up and the unit enters Standby mode
as described in Step 1- 2.
Standby/On
On
O
f
f
Power
