Safety - 3
SAFETY
Avoid Injury from Moving Parts
• Keep hands, feet and clothing away from snowblower
and discharge chute when auger is turning.
• Stop auger when you are not throwing snow.
• Stop vehicle engine before you unplug, repair, or adjust
snowblower.
Avoid Injury from Hitting Obstructions
• Raise snowblower when you drive between jobs.
• Slow down when you remove snow. Be cautious on
slopes, when you make turns or when close to buildings or
trees.
Practice Safe Maintenance
• Understand service procedure before doing work. Keep
area clean and dry.
• Never lubricate, service, or adjust machine while it is
moving. Keep safety devices in place and in working
condition. Keep hardware tight.
• Keep hands, feet, clothing, jewelry, and long hair away
from any moving parts, to prevent them from getting
caught.
• Lower attachments to the ground before servicing
machine. Disengage all power and stop the engine. Lock
park brake and remove the key. Let machine cool.
• Securely support any machine elements that must be
raised for service work.
• Never run engine unless park brake is locked.
• Keep all parts in good condition and properly installed.
Fix damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, or debris.
• Disconnect battery negative (-) cable before making
adjustments on electrical systems or welding on machine.
• Do not modify machine. Unauthorized modifications
may impair its function and safety.
• Do not wear radio or music headphones while servicing
the machine. Safe service requires your full attention.
